Elite Excavating LLCEliteExcavating LLC
Aerial view of a cleared and graded lot between houses on a residential street
Pole Barn Pads · Allenton

Pole Barn Pads in Allenton, MI

A level, compacted pad in Allenton, built to the size and elevation on your builder's print, so the barn that goes on it sits right.

  • Free on-site estimates
  • Owner-run by George
  • Based in Capac, MI

Free on-site estimate

Send it over and George calls you back.

Pole Barn Pads · Allenton

Pole Barn Pads in Allenton

Where the pad sits matters

A pad in a low spot collects water against the posts. George puts the barn on the high side where he can, and shapes the ground around it so water moves away before the build starts.

The same work covers a garage or shed pad, just smaller. Access for the build crew and their trucks is part of the plan, and the pole barn pad guide walks through the steps.

Driveways and pads on farm ground

A long drive across a field needs a firm base, a crown so water runs off both sides, and ditches or a culvert where the water has to cross. The same thinking applies to a pole barn pad: strip the topsoil, build up with compacted material and set the finished height above the ground around it. Read more in gravel driveways in St. Clair County and pole barn pads in St. Clair County.

Spring brings seasonal weight limits on many roads, which can hold up stone deliveries. Our guide to Michigan frost laws explains how they work, and the road commission posts the current notice.

The township comes first

Pole barn permits are handled locally, by the building department that covers your township, city or village. Zoning decides where the barn can go and how big it can be, so settle that before the pad is built, because the pad has to match what gets approved.

The stone spec comes from your builder, and trucking it in can be slowed by spring weight limits on the roads. MISS DIG 811 is contacted before any pad or post digging.

Allenton at a glance

Allenton sits about five miles south of exit 176 on I-69, which makes it one of the closest communities to Elite's base in Capac. The Allenton ZIP code, 48002, serves all of Berlin Township, which means a 48002 address could be in Allenton itself, out by Berville, or on any of the farm roads in between.

Berlin Township covers a little over 37 square miles and had 3,115 residents at the 2020 census. Most of that ground is farm fields, fence rows and wooded lots rather than subdivisions. That shapes the work: long gravel drives back to a house or barn, fields that have gone to brush, and pads for outbuildings on land that has never been built on.

A price before the work starts

George comes out to Allenton, walks the site with you and gives you one price before any work starts. The estimate is free, and he runs the machine himself.

Allenton is a short drive south of Capac, about five miles south of exit 176 on I-69, so it is one of the nearest places Elite serves. The rest of the work in town is on the Allenton page, and the pole barn pad prep page covers the service across St. Clair, Lapeer and Macomb counties.

Graded dirt area running up to a white fence
Main service page

Pole Barn Pads: A level, compacted pad built to the size and elevation your builder gave you, so the barn that goes on it sits right for the life of the building.

How it goes

No mystery, no surprise invoice.

Walk the job

George comes out, looks at the ground with you and talks through what it actually needs.

A number before work starts

You get a price for the job in front of you, not a rate and a shrug.

The machine shows up

The equipment arrives when it was said it would, and the work runs start to finish.

Left clean

Ruts knocked down, ground graded, debris gone. The site is finished, not abandoned.

On the ground

Photos of his work.

Every photo here is from a real Elite Excavating job. See more recent work. Or read about the full pole barn pad prep service.

Aerial view of brush cleared from around a pond on a rural property
Aerial view of a new-build lot graded beside a gravel drive in a subdivision
New build lot graded and shaped
Pad area beside a house cut and graded, shown before and after
What do you need from me before you start?

The pad size and elevation, and where you want it. If your builder has a print, that is all George needs.

Can you prep a pad for a garage or shed?

Yes. It is the same work on a smaller pad.

How long after the pad is done can the barn go up?

A pad built in compacted lifts is ready for the build crew when it is finished. Your builder sets the schedule from there.

Does Elite Excavating do pole barn pads in Allenton?

Yes. Allenton is a short drive south of Capac, about five miles south of exit 176 on I-69, so it is one of the nearest places Elite serves. George looks at the job himself, gives you a price before any work starts and runs the machine.

More around Allenton

Other work he takes on.

Somewhere else? See the full service area or call (989) 702-2426.

Pole Barn Pads in other towns

Free estimate

Free estimate in Allenton.

Send the details and he will come out, walk the job with you and give you a number before anything starts. If it is easier to talk it through, call him.

Capac, Michigan · St. Clair, Lapeer and Macomb counties

Free on-site estimate

Send it over and George calls you back.

Free estimate. A real number.

Call George. He walks the job with you and gives you a price before any work starts.

Call GeorgeFree Estimate